C Flute Corrugated Board
A deeper single-wall profile considered where cushioning and section depth matter more than the finest graphic surface.
What is C board?
C flute is a single-wall corrugated construction with one C-flute medium between two liners. Its deeper profile can offer more cushioning and section depth than E or B flute, while the actual papers, board test and structural design still control the result.
How the construction behaves.
- Construction
- Single wall · C flute · two liners and one corrugated medium
- Typical caliper
- FEFCO indicative flute height: 3.1 to under 4.0 mm, excluding facings. Finished board caliper varies by papers and corrugator profile.
- Print profile
- Accepts flexographic print and printed-sheet lamination, but its deeper flute profile is normally less inherently smooth than E flute.
- Structural profile
- Deeper single-wall section with useful cushioning for larger panels, shipping/display outers and selected promotional structures.
Where C is considered.
- Shipping-and-display outers
- Selected dump-bin bodies
- Product protection and dividers
- Large trays and sleeves
- Display components requiring cushioning
Practical advantages.
- More section depth than E or B flute
- Useful cushioning
- Suitable for larger single-wall components
- Common transport-packaging profile
Project-specific checks.
- 01Graphic surface requirement
- 02Product fragility and load
- 03Panel bow and flute direction
- 04Retail environment and moisture
- 05Distribution and loaded-display testing
E
A fine-profile single-wall board used where print quality, compact folds and precise die-cut detail matter.
B
A common single-wall board balancing die-cut control, flat-crush resistance and practical display stiffness.
EB
A double-wall board combining fine E flute with B flute for a smoother graphic face and practical display stiffness.
BC
A double-wall board combining B and C flutes for stiffness, cushioning and heavier retail-display structures.
EBC
A real seven-ply triple-wall construction combining E, B and C flute profiles for selected high-load components.
Target ready in about 2 working days.
Free unprinted structural sample — target ready in about 2 working days after the product data and structure are confirmed. Courier freight and complex printed prototypes are confirmed separately.
Timing begins after the technical brief is complete.C material questions
Requirements vary by product, retailer and programme. These are the practical starting points.
What are the real corrugated flute categories shown here?
E, B and C are single-wall profiles. EB and BC combine two flutes in a five-paper double-wall board. EBC combines E, B and C in a seven-paper triple-wall board where that grade is available. Exact profile tolerances and paper combinations must be confirmed with the corrugator.
Does the flute code alone define board strength?
No. Flute profile is only one input. Liner and medium papers, basis weights, recycled or virgin fibre content, flute direction, moisture, scoring and the finished structure all affect performance. Final selection should be tied to a documented board combination and prototype test.
What is the difference between EB and BC flute?
Both are double-wall boards. EB combines fine E flute with B flute and is often selected when graphics and die-cut detail matter. BC combines B and C flutes, creating a deeper section that is often considered for heavier or larger structures.
Is EB + BC a standard flute code?
No. EB and BC are separate double-wall constructions. EBC is a documented triple-wall combination with E, B and C flutes. A custom laminate made from separate sheets would need its own approved lay-up and must not be described as equivalent to EBC.
Can DisplayNexa provide a free material sample?
Free unprinted structural sample — target ready in about 2 working days after the product data and structure are confirmed. Courier freight and complex printed prototypes are confirmed separately.
How quickly can the structural sample be prepared?
The target for a straightforward unprinted structural sample is about 2 working days after complete product dimensions, weight, configuration and the proposed structure are confirmed. Printing, special hardware and complex prototypes can require a separately confirmed schedule.
How is a board approved for a loaded retail display?
Approval should combine the paper and flute specification with product-fit review, flute direction, shelf-span analysis, a physical prototype and a project-appropriate load and handling test. DisplayNexa does not publish one universal weight rating for a flute type.